Saturday, March 7, 2015

Working in the LAB



For normal colour image working I only tend to use LAB colour mode for colour correction or to bring out some ‘colour pop’. Like many, most of the time, I work in RGB colour mode . For instance in Lightroom this is the only colour space you can work in, whilst in Photoshop you can work in different colour spaces, eg: RGB, the normal/default colour mode; and CMYK mode, which is usually used for professional printing.

When you convert your image to Lab Colour mode, the colour Channels change to show ‘Lightness’, ‘a’ and ‘b’. Lightness is like a black-and-white version of the image, while ‘a’ and ‘b’ represent all the colours, including colours that ‘don’t exist’!

LAB Mode Colour Space
Crucially, this means that you can enhance colour and detail independently of one another, producing a vibrancy of colour that wouldn’t be possible in RGB mode.

Why is this important?

As mentioned above, in LAB mode colour casts are relatively easy to correct. Also, if your image is rather ‘flat’ in colour space, LAB processing will help separate out the limited colours that are present.

If you are processing for digital Infra-Red: you will have both of these issues to correct: a large red colour cast, that can’t readily be corrected via the temperature sliders, and, once the red colour cast is eliminated, you will have a very narrow colour range, especially if your IR conversion is 720nm of longer.

It is worth mentioning up front, that if you desire to carry out monochromic processing, ie eliminate colour from the image, then what follows is not that important. Having said that, if you are using, say, Silver Efex Pro II to carry out your B&W conversion, or Lightroom come to that, you may still wish to colour correct and/or channel swap your image.

In this post I’ll illustrate a very basic  IR, LAB-based processing workflow, using  the following image from my 720nm converted, 50D. Also, to further illustrate the power of a LAB-based workflow, I won’t bother to undertake any camera calibration, ie I’ll just work on the IR RAW image in Photoshop. Note that the exposure was set for this capture using Magic Lantern Auto-ETTR, hence the exposure is skewed to the right, but there is no overexposed highlights. The ETTR capture ensures we have the ‘best’ available tonal density to play around with.
RAW, as captured. image
Once the image is in Photoshop, the first thing to do is to move from RGB (the default) to LAB colour mode. This is achieved under the Image>Mode menu. Nothing will change in the image.
 
My first correction step is to carry out an a/b ‘channel swap’, as I wish to drive my sky to be blue: I tend to use the sky as my reality-touchstone when processing colour IR images.  As there is no channel swap available in LAB mode, the easiest way to achieve this is via a curves adjustment layer.

Once the curve adjustment layer is in place, simply invert the a and b channel  curves by moving the left hand extreme to the top and the right hand extreme to the bottom.  The linear curve should now be slopping down from left to right, rather that up from left to right.

The image will look horrible, because of the inverted red cast. The next step is to correct this.

Basic colour correction can be achieved by moving the black and white points on the base curve in, towards, the middle. You will need to play around with both a and b channels. Also, because you are in LAB mode, you can be aggressive with your slider movements, but try and remain reasonably symmetrical, else you will introduce additional colour casts.

Further curve corrections can be carried out by shaping the curve. Unlike an RGB curve, a LAB curve can be ‘insulted’ a lot, before you have ‘problems’. The following shows the base corrections, achieved with a single LAB curves adjustment layer, showing the b channel adjustment curve.
Basic colour correction using LAB mode
This is step one in the post processing, ie colour correction and basic colour ‘creation’. Additional processing will be required to make a final image. We will discuss subsequent processing steps in future posts, eg making use of luminosity masks etc.

Bottom line: if you wish to create colour (sic) IR imagery, you will be well served by learning about a LAB-based processing workflow. In future posts I will explore LAB processing in more detail. However, I hope this basic introduction has helped convince those die-hard RGB post-processors, that there is more to life in LAB colour space!

3 comments:

  1. Thank you Gary, this will take my IR to new heights!

    ReplyDelete
  2. Jerry: you're welcome. In the above I deliberately did not calibrate the source RAW in Lightroom, just to show the power of the LAB route. However, I would still recommend using Adobe Profile Editor to create an IR profile, as this will give a more balanced start for any LAB or RGB based processing.

    ReplyDelete
  3. Garry, Good luck persuading die-hard RGB post processors to even try LAB color mode. Many seems convinced that LAB is really for only the very advanced Photoshop users. Actually the basics are very easy in LAB. I actually do not understand the resistance to LAB color mode. Are you familiar with the book "Photoshop LAB Color" by Dan Margulis? The book is almost 10 years old. A new edition is due out later this year. In the interest of full disclosure, I am involved in beta reading the new edition. I am sure you will want a copy on your shelf when it is available.

    ReplyDelete